An ISO 9001:2015 Certified Company

IndiaMART TrustSeal

Send SMSSend Email

Home » Product Range »  Mechanical Engineering Equipment » Hydraulic Machines Lab. Equipment » Pelton Wheel Turbine Test Setup


Pelton Wheel Turbine Test Setup

Pelton Wheel Turbine Test Setup - (SIMHPWT-01)

Pelton Wheel Turbine is only impulse water turbine, now in common use, named in the honor of Sir L.A. Pelton (l829· 1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the Inlet of the Turbine is only kinetic energy. The Pressure at the Inlet and Outlet of the atmospheric. This turbine is used for high heads. The Present Set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The Circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure Gauge is fitted at the Inlet of the turbine to measure the total supply head of the turbine.

EXPERIMENT
  • To study the operation of a Pelton Wheel Turbine
  • To determine the Output Power of Pelton Wheel Turbine
  • To determine the Turbine Efficiency

Technical Specification
Model1.33 HP2 HP5 HP
Output Power1.33 HP/1KW2 HP/1.5KW 5 HP/3.75KW
Discharge300 LPM (Approx.)400 LPM (Approx.) 630 LPM (Approx.)
Supply Head25 m40 m45 m
Rope Brake Dynamometer Dia 200 mmDia 200 mmDia 300 mm
Sump Tank Capacity 150 LitersCapacity 200 LitersCapacity 300 Liters
Water Circulation Capacity 5 HPCapacity 7.5 HPCapacity 15 HP
Centrifugal Pump Three PhaseThree PhaseThree Phase
Speed 1000 RPM (approx.)
Impeller Material Brass, Bucket Type
NozzleMaterial Stainless Steel, Mild Steel
SpearMaterial Stainless Steel, Mild Steel
Discharge MeasurementPitot Tube with Manometer
Control PanelStar/ Delta Starter, Mains Indicator, MCB for overload protection



© Shambhavi Impex All Rights Reserved (Terms of Use)

Developed and Managed by IndiaMART InterMESH Limited

Member IndiaMART.com

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name